Tab Description

• MADE IN THE USA
• Double Insulated
• Meets IEC 60900 Standard for Insulated Hand Tools
• Exceeds ASTM 1505 Standards for Insulated Hand Tools
• Helps meet OSHA Requirements 29 CFR Part 1910.331-335
• Subpart S; 29 CFR Part 1910.269 Subpart K
• Meets NFPA 70E Requirement
• Tested to 10,000VAC and rated for 1,000VAC/1500VDC Maximum Exposure
• Impact Resistant and Flame Retardant
• 1000v tool, insulated tool, insulated tool kit, safety tool, electrician tools

*These tools meet the specification for Electric Vehicle Maintenance *

Lifetime Warranties (90-Day Warranty for Ratchets and Torque Wrenches)

Parts List

1. 66-253        SCREWDRIVER CABINET TIP SLOTTED 1/8" X 3"
2. 66-203        SCREWDRIVER SQUARE BLADE SLOTTED 3/16" X 4"
3. 30840         SCREWDRIVER ROUND BLADE SLOTTED 1/4" X 7"
4. 30836         SCREWDRIVER PHILLIPS #1 X 3"
5. 66-156        SCREWDRIVER PHILLIPS #2 X 4"
6. 5008           PLIER DIAGONAL HEAVY DUTY 7"
7. 5018           PLIER NEEDLE NOSE, WITH CUTTER 7"
8. 5030           PLIER LINESMAN 9"
9. FL               Flashlight
10. 12208         SOCKET 3/8" 1/2DR 12 POINT
11. 12209         SOCKET 7/16" 1/2DR 12 POINT
12. 12210         SOCKET 1/2" 1/2DR 12 POINT
13. 12211         SOCKET 9/16" 1/2DR 12 POINT
14. 12212         SOCKET 5/8" 1/2DR 12 POINT
15. 12213         SOCKET 11/16" 1/2DR 12 POINT
16. 12214         SOCKET 3/4" 1/2DR 12 POINT
17. 12-923F      EXTENSION 5" 1/2DRIVE FLARE END
18. 12812F       EXTENSION 10" 1/2DRIVE FLARE END
19. 1569           RATCHET 10" 1/2" DRIVE
20. IT-CASE     Tool Case

OEL Warranty

All necessary company safety practices for use of insulated tools should be followed and assigned per company/corporation safety policy/program. OEL Worldwide Industries does not assume liability for the improper care and/or use of insulated tools. Visual inspections and routine testing should be performed per necessary standards. OEL Worldwide Industries cannot anticipate all conditions under which this information and its products, or the products of other manufacturers in combination with its products, may be used. Users are advised to make their own tests to determine the suitability of each product or product combination for their own purposes.